Production catalog

Moon Oil Capital TOO oil and gas refinery refines a wide range of high-quality petroleum, natural gas, and other petrochemical products. All finished products are in accordance to the International ASTM and the Kazakhstan GOST standards.

Primary production and specifications

Aromatic hydrocarbons

Name of product	Gost number	Scope, achievements
Petroleum toluene	GOST 14710-78	A transparent liquid that does not contain impurities and water, not darker than a solution of KCrO concentration of 0.003 g / dm
Petroleum benzene	GOST 9572-93	The distillation limits of 98% by volume (including the boiling point of pure toluene 110.6 °C), °C, not more than 0.7, 0,8

Aromatic hydrocarbon is in full compliance with the technical requirements and in accordance to GOST 14710-78 and GOST 9572-93 standards with amendment 1-6.

Liquefied anhydrous ammonia

Name and brand of oil product	Gost number	Scope, achievements
Liquefied anhydrous ammonia	GOST 9572-93	Mass fraction of water (residue after evaporation),% Ak 0.2-0.4 – B 0.2-0.4

Liquefied anhydrous ammonia is in full compliance with the technical requirements and in accordance to GOST 9572-93 standards with amendment 1-6.

Unleaded gasoline

Name of product	Gost number	Scope, achievements
Gasoline automobile unleaded brand “AI-80”	GOST 32513-2013	The concentration of resin washed with a solvent, mg / dm (mg / 100 cm) of gasoline, not more than 50 (5)
Gasoline automobile unleaded brand “AI-92”	GOST 32513-2013	AI-80, AI-92, AI-95, AI-98 ecological classes K2, K3, K4, K5
Automobile unleaded gasoline of AI-95	GOST 32513-2013	Volume fraction of hydrocarbons,%, no more, for ecological classes K3, K4, K5
Gasoline unleaded automobile grade “AI-98”	GOST 32513-2013	The induction period of gasoline, min, at least 360
Unleaded automobile gasoline, Normal-80 grade	GOST R 51105-97	Fuel for internal combustion engines, unleaded gasoline
Unleaded automobile gasoline of the Regular-92 brand	GOST R 51105-97	The concentration of actual resins, mg per 100 cm of gasoline, not more than 5,0
Unleaded gasoline of the Premium Euro-95 brand	GOST R 51866-2002	Density at a temperature of 15 °C, kg / m – 720-775
Unleaded gasoline of the Super Euro 98 brand	GOST R 51866-2002	Copper plate corrosion (3 hours at 50 °C), units on a scale, Class 1
Gasoline for industrial purposes	STO 05766480-006-2010	Mass fraction of hydrocarbons according to the formula (naphthenic + aromatic N + A),%, not less than – 40
Stable reformat	TU 19.20.23.190-40-05755480-2017	Saturated vapor pressure, kPa, not more than A 38, B 38

Unleaded gasoline brands are in full compliance with the technical requirements and in accordance to GOST 32513-2013, GOST R 51105-97, GOST R 51866-2002, STO 05766480-006-2010 and TU 19.20.23.190-40-05755480-2017 standards.

Diesel fuel

Name of product	Gost number	Scope, achievements
Diesel fuel EURO	GOST 32511-2013	The indicator 16 is determined only by the introduction of methyl esters of fatty acids in the fuel
Diesel fuel	STO 05766480-010-2011	–
Diesel fuel EURO	GOST R 52368-2005	Lubricity: adjusted diameter of the wear spot at 60 °C, microns, not more than 460

Diesel fuel and EURO brands are in full compliance with the technical requirements and in accordance to GOST 32511-2013, STO 05766480-010-2011 and GOST R 52368-2005 standards.

Kerosene

Name of product	Gost number	Scope, achievements
Aircraft fuel for gas turbine engines Jet A-1	GOST R 52050-2006	Volume fraction of aromatic hydrocarbons,%, no more than 25,0
Fuel for jet engines	GOST 10227-86	Lower calorific value, kJ / kg, not less; 43120 – 42900

Aviation Jet fuel for gas turbine engines brands are in full compliance with the technical requirements and in accordance to GOST R 52050-2006 and GOST 10227-86 standards.

Oxygen

Name of product	Gost number	Scope, achievements
Technical oxygen	GOST 5583-78	Medical oxygen intended for aviation should be produced with a volume fraction of water vapor of not more than 0,0007%.

Technical oxygen is in full compliance with the technical requirements and in accordance to GOST 5583-78 standards.

Fuel oil

Name of product	Gost number	Scope, achievements
Mazut Fuel oil	GOST 10585-2013	Conditional viscosity at 100 °С, degrees of oil, not more than 6.80
Technological export fuel	TU 38.001361-99	Mass fraction of mechanical impurities,%, no more than 0,2 – 0,2
Vacuum gas oil	TU 38.1011304-2004	Kinematic viscosity at 50 °С, mm / s, within; 5.0-25.0 – 25.1-60.0

Fuel oil is in full compliance with the technical requirements and in accordance to GOST 10585-2013, TU 38.001361-99 and TU 38.1011304-2004 standards.

Technical sulfur

Name of product	Gost number	Scope, achievements
Technical sulfur	GOST 127.1-93	Mass fraction of acids in terms of sulfuric acid,%, not more than; 0.0015 – 0.003 – 0.004 – 0.01 – 0.02
Sulfur technical gas granular	STO 05766480-008-2011	Mass fraction of sulfur,%, not less than 99,98 – 99,95 – 99,90

Technical sulfur is in full compliance with the technical requirements and in accordance to GOST 127.1-93 and STO 05766480-008-2011 standards.

Marine fuel

Name of product	Gost number	Scope, achievements
High-viscosity ship fuel E	TU 38.1011314-2001	Mass fraction of sulfur in marine fuel should not exceed: 3.5% (until December 31, 2010); 2% (until December 31, 2012); 1.5% (from January 1, 2013)

Marine fuel is in full compliance with the technical requirements and in accordance to TU 38.1011314-2001 standard.

Liquefied gases

Name of product	Gost number	Scope, achievements
Liquefied petroleum hydrocarbon gases for household consumption	GOST 20448-90	With a mass fraction of mercaptan sulfur of 0.002% or an odor intensity of less than 3 points, liquefied gases should be odorized
Normal butane	STO 05766480-005-2010	The amount of butylenes, not more than 0.5 – 0.5 – 0.5
Isobutane	STO 05766480-004-2010	Normal butane, no more than; 0.7 – 2.0 – 6.0
Liquefied petroleum hydrocarbon gases	GOST R 52087-2003	At temperatures of minus 20 °C and minus 30 °C, the pressure of saturated vapors of liquefied gases is determined only in the winter period.

Liquefied gases is in full compliance with the technical requirements and in accordance to GOST 20448-90, STO 05766480-005-2010, GOST R 52087-2003 and GOST 20448-90 standards.

Other production and specifications

Light gas oil catalytic cracking and coking grade A

Name of product	Normative document	Scope, achievements
Light gas oil catalytic cracking and coking grade A	TU 38.301-19-31-91 rev .1-2	Light gas oil catalytic cracking and coking is a mixture of gas oil catalytic cracking and coking (in any ratio or pure form) and gas oil catalytic reforming of gasolines (aromatic hydrocarbons C10 (C-900V KPA)). It is used as a component in the manufacture of fuels, as well as as a collector for coal flotation.

Light gas oil catalytic cracking and coking grade A is in full compliance with the technical requirements and in accordance to TU 38.301-19-31-91 rev .1-2 standard.

Catalytic gas oil

Name of product	Normative document	Scope, achievements
Catalytic gas oil – raw material for carbon black brand A	TU 38.301-19-87-97 rev .1-4	Catalytic gas oil – raw materials for carbon black are obtained by mixing catalytic cracking gas oil, heavy coking gas oil and extracts from the selective purification of oils. Designed for use as raw material for the production of carbon black.

Catalytic gas oil raw material for carbon black brand A is in full compliance with the technical requirements and in accordance to TU 38.301-19-87-97 rev .1-4 standard.

Alkylate

Name of product	Normative document	Scope, achievements
Alkylate – a component of gasoline	STO 00148725-013-2017	Alkylate – a component of motor gasoline is used as a high-octane component for the preparation of gasoline and is intended for supply to the domestic market and for export.

Alkylate is in full compliance with the technical requirements and in accordance to STO 00148725-013-2017 standard.

Mixture of aviation gasoline components

Name of product	Normative document	Scope, achievements
Mixture of aviation gasoline components grade A (grade B)	STO 11605031-079-2013	The mixture of aviation gasoline components is designed to produce commercial leaded aviation gasoline by introducing tetraethyl lead (TPP) and other necessary additives into it.
Grade	A	Grade A is used as the base fuel in the production of commercial aviation gasoline with an octane rating of at least 99.6 according to the motor method (aviation gasoline grades: Avgas 100LL and B-100/130).
Grade	B	Grade B is used as the base fuel in the production of commercial aviation gasoline with an octane rating of at least 91.0 according to the motor method (aviation gasoline grades: B-91/115 and B-92).

Mixture of aviation gasoline components grade A (grade B) are in accordance to the requirements of the new interstate standard STO 11605031-079-2013 of the technical regulation of the Customs Union..

Fuel boiler

Name of product	Normative document	Scope, achievements
Fuel boiler (fuel oil) TKM-16 brand with sulfur 2.0%, ash	TU 38.401-58-74-2005 amend. 1-4	Boiler fuel (fuel oil) complies with the requirements of the technical regulation of the Customs Union “On requirements for automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil” (TR CU 013/2011), adopted by Decision of the Customs Union Commission dated 10/18/2011 No. 826. Obtained from refined petroleum products, gas condensate feedstocks. Designed for vehicles, stationary boiler rooms and technological installations.

Boiler fuel (fuel oil) is in full compliance with the technical requirements and in accordance to TU 38.401-58-74-2005 amend. 1-4 standard.

Toluene concentrate grade A

Name of product	Normative document	Scope, achievements
Toluene concentrate grade A	TU 38.301-19-97-96 rev .1-3	Toluene concentrate is obtained in the process of catalytic reforming of gasoline fractions. It is used as a raw material for the production of caprolactam.

Toluene concentrate grade A is in full compliance with the technical requirements and in accordance to TU 38.401-58-74-2005 amend. 1-4 standard.

Benzene oil highest purification

Name of product	Normative document	Scope, achievements
Benzene oil highest purification	STO 00148725-006-2014 amend.1	Petroleum benzene is obtained in the process of clear distillation from a mixture of hydrocarbon streams of catalytic reforming of gasoline fractions, thermal dealkylation of toluene, disproportionation and transalkylation of aromatic hydrocarbons. Designed for delivery to the domestic market and for export.

Benzene oil highest purification is in full compliance with the technical requirements and in accordance to STO 00148725-006-2014 standard.

Orthoxylene

Name of product	Normative document	Scope, achievements
Orthoxylene higher grade oil	STO 00148725-006-2014 amend.1	Petroleum orthoxylene is obtained in the course of a clear rectification from a mixture of hydrocarbon streams of catalytic reforming of gasoline fractions, xylene isomerization, disproportionation and transalkylation of aromatic hydrocarbons. Designed for delivery to the domestic market and for export.

Orthoxylene higher grade oil is in full compliance with the technical requirements and in accordance to STO 00148725-006-2014 amend. 1 standard.

Paraxylene

Name of product	Normative document	Scope, achievements
Paraxylene petroleum higher purification	STO 00148725-006-2014 amend.1	Petroleum paraxylene is obtained in the process of selective adsorption from a mixture of aromatic hydrocarbon streams for catalytic reforming of gasoline fractions, xylene isomerization, disproportionation and transalkylation of aromatic hydrocarbons. Designed for delivery to the domestic market and for export.

Paraxylene petroleum higher purification is in full compliance with the technical requirements and in accordance to STO 00148725-006-2014 amend.1 standard.

Coke electrode total grade A

Name of product	Normative document	Scope, achievements
Coke electrode total grade A	TU 38.301-19-99-99 rev .1	Total electrode coke is obtained from heavy oil residues. Designed for use in electrode and other industries, and also used as raw material for the installation of calcination of petroleum coke.

Coke electrode total grade A is in full compliance with the technical requirements and in accordance to TU 38.301-19-99-99 rev .1 standard.

Sulfur technical gas lump, grade 9920

Name and brand of oil product	Normative document	Scope, achievements
Sulfur technical gas lump, grade 9920	GOST 127.1-93	Sulfur technical gas is obtained during the purification of natural and coke oven gases, as well as waste gas from oil refining. It is used for the production of sulfuric acid, carbon disulphide, dyes, in the pulp and paper, textile and other industries, as well as for export.

Paraxylene petroleum higher purification is in full compliance with the technical requirements and in accordance to STO 00148725-006-2014 amend.1 standard.

Microspherical zeolite-containing catalyst

Name of product	Normative document	Scope, achievements
Microspherical zeolite-containing catalyst, Biceolite brand N Vanguard 1 Vanguard-2	TU 38.301-19-151-2005 amend. 1-9	The microspherical zeolite-containing catalyst is intended for use in the processes of catalytic cracking of crude oil in order to obtain the maximum yield of the gasoline fraction at an increased octane number and selection of the fatty gas fraction with a high olefin content.

Microspherical zeolite-containing catalyst, Biceolite brand N Vanguard 1 Vanguard-2 is in full compliance with the technical requirements and in accordance to TU 38.301-19-151-2005 amend. 1-9 standard.

The catalyst of microspherical

Name of product	Normative document	Scope, achievements
The catalyst of microspherical second zeolite-containing equilibrium	STO 00148725-017-2017	The microspherical zeolite-containing equilibrium catalyst is intended for use in the processes of catalytic cracking of crude oil.

The catalyst of microspherical second zeolite-containing equilibrium is in full compliance with the technical requirements and in accordance to STO 00148725-017-2017 standard.

Liquid glass solution

Name of product	Normative document	Scope, achievements
Liquid glass solution	TU 38.301-19-65-92 rev .1-3	A liquid glass solution is obtained in the production of a microspherical zeolite-containing catalyst and is used as a binder in construction.

Liquid glass solution is in full compliance with the technical requirements and in accordance to TU 38.301-19-65-92 rev .1-3 standard.

Propane-propylene fraction A grade

Name of product	Normative document	Scope, achievements
Propane-propylene fraction A grade	TU 0272-024-00151638-99 rev. 1-4	The propane-propylene fraction is produced at gas fractionation units and at catalytic cracking units of oil refineries. It is used as a raw material for the production of polymer distillate and concentration plants.

Propane-propylene fraction A grade is in full compliance with the technical requirements and in accordance to TU 0272-024-00151638-99 rev. 1-4 standard.

Liquefied hydrocarbon gases for motor vehicles

Name of product	Normative document	Scope, achievements
Liquefied hydrocarbon gases for motor vehicles of the PBA, PA brands	GOST 27578-87 rev .1	Liquefied hydrocarbon gases: automobile propane-butane (PBA), automobile propane (PA) are used as motor fuel for automobile transport. PA and PBA are made by compounding the propane, isobutane and butane fractions of the normal HFC-2 unit. Liquefied petroleum gas for automobile transport.

Liquefied hydrocarbon gases for motor vehicles of the PBA, PA brands is in full compliance with the technical requirements and in accordance to GOST 27578-87 rev .1 standard.

Fuel gas

Name of product	Normative document	Scope, achievements
Fuel gas	TU 38.301-19-134-2001 amend. 1-3	Fuel gas is obtained as a result of various processes of destructive oil refining and is used as fuel for technological furnaces.

Fuel gas is in full compliance with the technical requirements and in accordance to TU 38.301-19-134-2001 amend. 1-3 standard.

Hydrogen-containing gas (WASH gas)

Name of product	Normative document	Scope, achievements
Hydrogen-containing gas (WASH gas)	STO 00148725-006-2014 amend.1	Hydrogen-containing gas is obtained in catalytic reforming plants and used in technological facilities consuming hydrogen.

Hydrogen-containing gas (WASH gas) is in full compliance with the technical requirements and in accordance to TU 38.301-19-135-2001 amend. 1-4 standard.

Oil tar

Name of product	Normative document	Scope, achievements
Oil tar	STO 00148725-007-2014 amend. 1-2	Oil tar is obtained by vacuum distillation of fuel oil and is used as raw material for various bituminous materials. Designed for delivery to the domestic market and for export.

Oil tar is in full compliance with the technical requirements and in accordance to STO 00148725-007-2014 amend. 1-2 standard.

We fully comply with the requirements of the Technical Regulation of Customs Union Commission dated 10/18/2011 No. 826.